| 22 | 0 | 13 |
| 下载次数 | 被引频次 | 阅读次数 |
为了解决留西油田路36断块单井液量大、高含水、地面水处理量大的问题,通过分析留西油田目标区块地质特征的适配性,重点研究同井注采技术在井下油水分离、采出系统和注入系统等技术措施在提高单井产量方面的作用效果。现场试验结果表明,同井注采技术的应用有效降低了单井产液量,降低了含水率,为油田后期开发提供了更高效的技术支撑。
Abstract:In view of the problems of 36 fault block in the road of Liuxi Oilfield, such as large liquid volume in single well, high water cut and large surface water treatment capacity, through the analysis on the adaptability of geological characteristics of target blocks in Liuxi Oilfield, the research focuses on the technical measures of the same-well injection and production technology in aspects such as downhole oil-water separation, production systems and injection systems, and their effects on increasing the output of individual wells.The test results show that the application of the same-well injection and production technology has effectively reduced the liquid production of a single well and the water content, providing more efficient technical support for the later development of the oilfield.
[1]程天才,姜民政,董康兴,等.有杆泵同井注采系统杆柱动力学分析[J].地震工程与工程振动,2019,39(6):97-105.
[2]赵立新,蒋明虎.井下油水分离与产出水回注技术综述[J].国外石油机械,1999,10(3):49-54.
[3]易良平,张程,杨兆中,等.井下油水分离装置现状与展望[J].科学技术与工程,2024,24(8):3043-3053.
[4]王德民,张怀钰,王研,等.同井注采工艺技术及其矿场应用[J].大庆石油地质与开发,2023,42(4):45-54.
[5]卢忠润.同井注采井下串联旋流器流场特性与分离性能研究[D].大庆:东北石油大学,2024.
[6]彭永刚,郑国兴,郑学成,等.旋流式井下二次油水分离同井注采技术适用性分析[J].石油石化节能与计量,2024,14(6):1-5.
[7]褚英杰,高飞,李屹东,等.海上油田一井多用工艺管柱优化设计[J].中国石油和化工标准与质量,2021,41(20):168-169.
[8]刘金堂,张蕾蕾,王研,等.同井注采技术节能降耗效果分析[J].石油石化节能与计量,2024,14(12):28-33.
[9]李巍巍.同井注采注入性能优化设计与试验[J].化学工程与装备,2020(9):108-110.
基本信息:
DOI:10.20029/j.issn.1004-1346.2026.04.014
中图分类号:TE357.6
引用信息:
[1]陈学勇,吴琬琦,苗彦平,等.同井注采技术在留西油田的应用[J].石油工业技术监督,2026,42(04):71-75.DOI:10.20029/j.issn.1004-1346.2026.04.014.
2026-04-14
2026-04-14